EN ▾

Uncensored LLM: local or API, which to choose

An uncensored LLM can be run on your own PC or called via API. Here you find hardware, costs and maintenance for both paths, with verifiable numbers.

Uncensored LLM: Analysis of Available Options

Updated:

Isometric balance: on one side a workstation with local GPU, on the other a cloud server connected via cable.

Key points

  • Local you pay for hardware upfront and maintenance always; via API you pay only for tokens used.
  • With $0.15 per 1M input tokens and $0.50 per 1M output tokens, $20 covers tens of millions of tokens.
  • Local wins for continuous intensive use, offline work and total control over weights.
  • API wins for those starting today, with little GPU or wanting an OpenAI-compatible endpoint.

The short answer

If you are looking for an uncensored LLM and do not already have a GPU with plenty of memory, the API is almost always the most sensible starting point. If instead you generate text all day, work offline or want to choose and modify weights, local deployment pays off the investment. Here is the comparison in a table.

AspectLocalVia API
Initial costGPU, power supply, coolingNone, top up from $20
Recurring costElectricity, wear and tear, your timeOnly tokens used
Time to startHours or days between download and testsA few minutes
Model choiceFree, you can keep manyOnly one, chosen by the provider
Max contextDepends on your available memory100,000 tokens
Works offlineYesNo
Parallel requestsAs many as your GPU can handle8 with full key

There is no absolute right choice. The sections below help you understand which side you are on.

What is really needed to run it at home

The bottleneck is video memory. Model weights must fit in VRAM, otherwise they fall back to system RAM and speed drops. As a rough order of magnitude, a small quantized 4-bit model typically takes a few gigabytes, while a very large one may require dozens. Exact values depend on the model and quantization, so always check the individual model card and tool documentation.

This adds context cache: the longer the conversation, the more memory it consumes beyond weights. A context of tens of thousands of tokens on a large model may require additional gigabytes.

The software

For local inference there are well-known tools like llama.cpp, Ollama and vLLM. Ollama and vLLM also expose an endpoint compatible with the OpenAI format, so the code you write today for a local server moves to a remote API by changing two lines. For installation details refer to the documentation of each project.

Finding the model

Open-weight models with fewer refusals are published by various communities, but quality is very uneven. Some lose coherence after modification, others respond well only with a precise prompt format. Expect to try several before finding one that fits.

How much does the API cost, with the math done

The rate is $0.15 per 1M input tokens and $0.50 per 1M output tokens, prepaid, no subscription. Failed or rejected requests are not charged and the credit never expires. Let's look at three scenarios.

  • Light usage. 2M input tokens and 500,000 output tokens per month: 2 × $0.15 = $0.30 plus 0.5 × $0.50 = $0.25, total $0.55.
  • Medium use. 50M input and 10M output: 50 × $0.15 = $7.50 plus 10 × $0.50 = $5.00, total $12.50.
  • Heavy use. 400M input and 80M output: 400 × $0.15 = $60 plus 80 × $0.50 = $40, total $100.

The minimum top up is $20, so in the average case a single deposit covers more than a month. Above certain thresholds there is a bonus: +5% from $50, +10% from $100, +15% from $200. For example $100 becomes $110 in credit. The full price list is on the API pricing page.

For on-premise the calculation is less straightforward. Start with the GPU price, divide it by the months you plan to use it, and add electricity: power in kW multiplied by usage hours multiplied by your contract rate. Divide the result by the tokens you actually generate to get your cost per million. Plug in your numbers and compare with $0.50 per million output.

Maintenance that is usually forgotten

Choosing on-premise means handling everything else too. CUDA drivers and libraries breaking after an update, new inference engine versions, changing quantization formats, models to re-download. If the service serves other people, add monitoring, automatic restarts, and queue management when more requests arrive than the GPU can handle.

None of this is difficult, but it requires recurring time. If your time is worth something, factor it in: a few hours a month weigh more than the $12.50 from the average scenario above.

With the API, maintenance on your side is reduced to a key, a base URL, and handling 429 errors, described in the documentation. In exchange, you depend on the provider: if they have a problem, you cannot intervene.

When on-premise makes sense and when the API does

Choose on-premise if

  • you already have a suitable GPU and the marginal cost is only electricity;
  • you generate text continuously, for hours, every day;
  • you need to work offline or with data that cannot leave your machine;
  • you want to switch models often, fine-tune, or experiment with weights.

Choose the API if

  • you want a working endpoint today, without buying anything;
  • your usage is spiky: a bot, a nightly script, a prototype;
  • you need a long context (100,000 tokens here) without sizing memory;
  • you want to scale to 8 parallel requests without thinking about hardware.

Many teams use both approaches: the API to start and for spikes, on-premise for steady loads. Since the format is the same, switching from one to the other requires no application rewrite.

A simple method to decide

Before buying anything, measure. For a week, log how many tokens you consume, deriving them from the usage field in responses or your tool's counter. Then do three calculations.

  1. Multiply weekly input tokens by 4 and by $0.15 divided by one million.
  2. Do the same for output tokens at $0.50.
  3. Sum the two results and compare them with the monthly hardware installment plus electricity.

If the API sum stays below a few dozen dollars a month, buying a GPU for this rarely makes sense. If it exceeds the installment significantly, on-premise starts to become interesting. A separate case is latency: on your machine you do not cross the network, but a home GPU with a large model can be slower than a hosted service. Try both on your load, because differences depend on the model and prompt length.

Also keep in mind growth. A prototype that consumes little today can multiply when others use it. The API handles up to 8 simultaneous requests with the full key, while locally every additional user slows down everyone else until you add hardware.

Test the API in five minutes

To test, you need a key. After registering with Google or with email and password, on the key page you can request with one click $0.50 of trial credit, valid for 7 days and without needing to pay. Go to get your API key. The test key has a limit of 2 concurrent requests and 60 per minute.

import os
from openai import OpenAI

client = OpenAI(
    base_url="https://api.apiiasenzacensura.com/v1",
    api_key=os.environ["API_KEY"],
)

risposta = client.chat.completions.create(
    model="uncensored",
    messages=[{"role": "user", "content": "Spiega in tre frasi cos'è la quantizzazione di un modello."}],
)
print(risposta.choices[0].message.content)

If you later want to move to a local server with a compatible endpoint, just change base_url and the model name.

What it does not do

It is a single open-weight model, managed by an independent provider and trained to answer without content rejection for lawful adult use. It is not the official API of any major lab, does not generate images, audio or video and offers no embeddings or fine-tuning. An absolute limit remains: no sexual content involving minors. For a broader overview see the Uncensored AI page. Prompts are not used for training.

Other guides

Q&A

Is a local LLM really more private?

With local deployment, data stays on your machine, so yes, provided you secure it. With the API, prompts travel to the provider; here they are not used for training.

How many tokens can I use with $20?

If everything were input, 133.3 million tokens ($20 divided by $0.15 per million). If everything were output, 40 million ($20 divided by $0.50). In practice, it is somewhere in between, depending on the ratio between the two.

Can I use my existing OpenAI code?

Yes. The API is compatible with OpenAI SDKs: change base URL and key and use the uncensored model. Full chat completions, responses, streaming, and tool calling are supported.

Is the context the same locally and via API?

No. Through the API the limit is 100,000 tokens for prompts and responses combined. Locally it depends on the model and your GPU memory, because the context cache grows with length.

Your key is just one form away

Create an account, copy the key, edit the base URL. That is all the configuration.